Editing video
SQT0351
53
• Teletext will not be recorded.
• File Conversion is stopped when this unit is turned on
during performing “During standby” conversion. Conversion
will start from the beginning again once the unit is switched
to standby mode.
• When converted, the audio content and subtitle language
will be selected according to the following settings:
- “Multi Audio” of “Preferred Language” (> 85)
- “Subtitles” of “Preferred Language” (> 85)
- Audio for HG / HX / HE / HL / HM Recording (> 89)
• When converted, 3D information may not be retained.
• In titles with the Auto Renewal Recording function (> 35)
set, a programme may be unintentionally converted while in
“During standby”.
[HDD]
Encrypted titles ( ) can be decrypted manually.
To cancel the decryption
Press and hold [RETURN ] for more than
3 seconds.
• For decryption, the CI module that supports the programme
is necessary.
• Depending on the programme, playback/decryption may
not be possible.
• During decryption, do not remove the CI module from this
unit.
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]
1 Select “Chapter View”, then press [OK].
2 Perform the editing operations.
Playback from Chapter View
Refer to “Playback from Chapter View”. (> 42)
• The maximum number of chapters:
(Depends on the state of recording.)
[HDD ] [USB_HDD]: Approx. 1000 per title
[BD-RE] [BD-R] [RAM]: Approx. 1000 per disc
• [HDD ] [USB_HDD] When the title has the maximum number of
chapters, you cannot perform the Resume play function
(> 40) with the title.
• This function cannot be used on encrypted titles ( ).
File Decryption
1 Select “File Decryption” in “Edit”, then press
[OK].
2 Select whether to delete the original title or
not, then press [OK].
•Yes
The original title will be deleted to save HDD
capacity after decryption.
•No
The original title remains after decryption.
3 Select “Start”, then press [OK].
Decryption will start.
“Decrypting” appears during decryption.
• When a title that is copy protected (One
generation copy is permitted) is selected, the
original title will be deleted after decryption.
(> 15)
• When a decryption fails, the screen icon
( ) is changed to “ ”.
Editing chapters
Edit Chapter Mark:
Select the point where you want to start a new
chapter while viewing the title.
1 Press the green button.
2 Press [OK] at the point you want to divide.
• Repeat this step.
3 Press [RETURN ] to go to Chapter View
screen.
To delete the chapter:
1 Select the chapter, then press [DEL].
Multiple editing
Select the chapter, then press the yellow
button.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
2 Select “Delete”, then press [OK].
To combine chapters (Delete chapter
mark):
1 Select the chapter, then press [OPTION].
2 Select “Combine Chapters”, then press
[OK].
3 Select “Combine”, then press [OK].
The selected chapter is combined to the
next chapter.
DMR-BCT84_74EN_eng.book 53 ページ ２０１４年７月２４日 木曜日 午後５時３分
To Next Page
Loading...
