Convenient functions
SQT0351
89
[BCT84]
Settings for High Clarity Sound
You can set “Audio Output” and “Front Panel
Display” when “High Clarity Sound” (> 81) is set
to “On (Video Off)” or “On(Video On)”.
Audio Output
Select a terminal that will stop processing
audio signals.
• Set an option for video playback and audio
playback.
Front Panel Display
Select whether or not to turn on/off the front
panel display.
• Set an option for video playback and audio
playback.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio for HG / HX / HE / HL / HM Recording
If the programme has multi channel audio,
priority is given to what you select.
• This setting will give effect in the following
cases.
- Timer recording (> 34)
- File Conversion (> 52)
- Normal speed copy in HG, HX, HE, HL or HM
mode from a title recorded in DR mode.
(> 56, 59)
Display
Language
Select the language for on-screen menus.
On-Screen Information
Select the time until the channel information
screen (> 27) disappears automatically.
Front Panel Display
Changes the brightness of the front panel
display.
• If “Automatic” is selected, the display turns dark
during play and disappears when the unit is in
standby mode. While using this mode, the
standby power consumption can be reduced.
• When “Quick Start” is set to “Off” or “Timer
Setting for Quick Start” (> 93), this function is
fixed to “Automatic”.
Screen Saver
This is to prevent burn-in on the screen.
Teletext
Select the Teletext (> 28) display mode.
DMR-BCT84_74EN_eng.book 89 ページ ２０１４年７月２４日 木曜日 午後５時３分
To Next Page
Loading...
