Panasonic DMR-BCT835 - When You Experience Problems with; Easy Network Setting

Troubleshooting
When you experience problems with
Easy Network Setting
If there is any problem, the following
message is displayed on the screen.
Wireless Settings
Display Check the following
A conflict with
other devices
occurred.
• Please wait a few moments,
and then try again.
A time out error
occurred.
• Setting of the Wireless
router for MAC Address etc.
• The signal may be weak.
• The SSID and the encryption
key of the Wireless router.
• Please wait a few moments,
and then try again.
An
authentication
error or a time
out error
occurred.
A device error
occurred.
• If the problem is not solved,
consult your dealer.
Easy Network Setting ( Home Network
Connection Check )
Display
Check the
following
1. LAN cable
• Connection
connection or
“Fail”
of the LAN
Wireless setting:
cables
2. IP address
setting:
“Fail”
(* 20)
• Settings of
the hub and
3. Connection to
“Fail”
router
gateway:
1. LAN cable
• Connection
connection or
“Pass”
and settings
Wireless setting:
of the hub
2. IP address
“Fail”
and router
setting:
• Settings of
“IP Address
/
3. Connection to
“Fail”
DNS
gateway:
Settings”
1. LAN cable
connection or
Wireless
setting:
2. IP address
setting:
3. Connection to
“Pass”
“Pass”
“Fail”
(O 84, 96)
gateway:
1. LAN cable
connection or
Wireless
setting:
“Pass”
2. IP address
“Home
setting:
network
available”
3. Connection to
“Fail”
gateway:
VQT4W71
115