• This operation will only record to built-in HDD.
• This unit can record two programmes being
broadcasted at the same time.
• About CI Plus restriction (o 15)
• Notes for recording of an encrypted broadcast
(O 34)
1 Select the channel to record.
2 Press [REC MODE] and select the
conversion mode, then press [OK].
• This unit will record the programmes in DR
mode once, and then automatically
convert to the selected recording mode
while this unit is in standby.
• Recording mode (O 8)
• The conversion mode set here is used
as an initial value for the next recording.
3 Press [REC •].
Recording starts.
• “REC1 ” or “REC2” will light on the unit's
display.
4 Select “Automatic Stop”, then press
[OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
• You can also select “Recording Time” or
“Continuous recording”. (O below)
To set the recording time
1 Select “Recording Time” or “Continuous
recording” in step 4 (O above).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with [2,
►].
Continuous recording:
The recording is continued until you press
[STOP ■].
2 Press [OK].
Conversion Mode Setting HDD
Remain Oh Om (DR) Data Size
To Next Page
Loading...
