Panasonic DMR-BCT835 - To Confirm and Edit a Timer Programme

Recording
To confirm and edit a timer
programme
1 Press [PROG/CHECK].
e.g.,
Timer Recording HDD 30:30 DR TUE 01.01.2013 8:05
Channel Name Schedule Mode Space
©
oooo
World nm• *
MON 07.01 11:00
- 11:45
DR
OK
©
OOOO
Football
MON 07.01 10:00
- 11:50
HG
OK
©
OOOO
Star
MON 07.01 11:30
- 1:00
DR
m !
OOOO Doga and Cata
TUE 01.01 8:00 -
10:45
DR
New Timer Programme
^RETURN
Total 3/32
Turn
Timer Off
□ Delete $ Info
□ □ □
Page Up
Page Down
2 Select the programme, then perform
the operations.
To deactivate a timer programme
Press the red button.
• The timer icon “©” will change from
red to grey.
• Press the red button again to
activate timer recording standby.
(The timer icon “©” will change to
red.)
To delete a timer
programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer
recording options. •
Refer to “Timer
recording options”.
(* 37)
3 Press [OK].
Screen icons
©
Red: Timer recording standby is
activated. Grey: Timer recording
standby is deactivated.
•
Currently recording programme
0
A part or all of the programme will not
be recorded since the programme is
overlapping.
m
The HDD is full.
g Copy-protected programme It was not
recorded.
The recording of the programme was
not completed because of some reason.
Auto Renewal Recording is set (O 37).
H
Displayed if timer recording of two
encrypted programmes is overlapping.
(When “Recording for Encrypted
Channel” is set to “Decrypt Recording”
only)
A part or all of the programme will not
be recorded since the encrypted
programme is overlapping.
OK
Displayed if the recording can fit in the
remaining space
-->
(Date)
Daily or weekly timer programme is set.
! It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (O 120)
- programmes are deactivated, etc.
To show programme information
Press [STATUS ®].
To exit the timer recording list
Press [EXIT®].
VQT4W71
39