Copying the HD Video (AVCHD)
§
æ
t
USB
-► ©
video camera, etc.
§ “For data files (O 9)” only
e.g., Connecting to the Panasonic video camera
(optional)
1 Connect the video camera or insert the
media.
• Make the video camera ready for data
transfer.
2 Select the title, then press the yellow
button. A check mark is displayed.
Repeat this step.
• Press the yellow button again to cancel.
(All the recordings on the same date
become a title.)
3 Press [OK].
4 Select “Start”, then press [OK].
It will automatically format the
unformatted disc, such as a new disc.
• It may take time for the copying to
start.
The menu screen appears. (O 43)
5 Select “Copy Video (AVCHD )”, then
press [OK].
6 When copying from an SD card or video
equipment:
Select “Copy to HDD” or “Copy to
Blu-ray Disc”, then press [OK].
To stop copying
Press and hold [RETURN @] for 3 seconds.
To copy to the DVD-R in High Definition
Refer to “Copying HD Video (AVCHD) to the
DVD-R in High Definition”. (O 63)
a
• The original file must be in the AVCHD standard.
• If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the
connected equipment.
• An AVCHD title with 100 or more scenes will be divided
into titles every 99th scene and copied.
E] (NTSC) Title recorded using a different
(PAi )
encoding system from that of the
(PAL)
unit.
• Titles displaying these marks
cannot be selected.
To Next Page
Loading...
