EasyManua.ls Logo

Panasonic DMR-BCT940 - Specifications

Panasonic DMR-BCT940
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference
SQT0292
118
Specifications
Reference
Specifications are subject to change without
notice.
General
Dimensions: 430 mm (W)
70 mm (H)
(excluding the projecting parts)
199 mm (D)
(including the projecting parts)
210 mm (D)
Mass: Approx. 3.1 kg
Power supply: AC 220 V to 240 V, 50 Hz
Power consumption: [BCT940] Approx. 39 W
[BST940] Approx. 61 W
“Quick Start” is activated and “Power Save
for Network Standby” is set to “Off”
Approx. 8 W
“Quick Start” is activated and “Power Save
for Network Standby” is set to “On”
Approx. 6 W
“Quick Start” is not activated and
“RF OUT ( Aerial Signal )” is set to “Off”
[BCT940] Approx. 0.2 W
“Quick Start” is not activated
[BST940] Approx. 0.2 W
Operating temperature: 5 oC to 40 oC
Operating humidity range: 10 % to 80 % RH
(no condensation)
TV system
[BCT940]
Tuner System: DVB-C/T
Country: Germany, Austria, Switzerland
Channel coverage: VHF: 5 - 12
UHF: 21 - 69
CATV :S1 - S20 (M1 - U10) 7 MHz Band
D051 - D073
D113 - D858
[BST940]
Tuner System: DVB-S/DVB-S2
Antenna receive frequency:
950 MHz to 2150 MHz
Input impedance: Nominal 75
Demodulation: QPSK, 8PSK
LNB input: F shape terminal female,
power supply 13 V/18 V max. 400 mA
DiSEqC: Version 1.0 or Tone burst A/B,
22 kHz 0.65 Vp-p
Recording system
DR mode: Partial TS
HG, HX, HE, HL, HM mode:
MPEG-4 AVC/H.264, Dolby Digital
XP, SP, LP, EP mode:
MPEG-2 (Hybrid VBR), Dolby Digital
Input terminal
AV in (21 pin): 1 pc.
Analogue video input (PAL/NTSC/SECAM):
1Vp-p(75)
Analogue audio input (L/R):
Standard: 0.5 Vrms,
Full scale: 2.0 Vrms at 1 kHz (> 10 k)
Output terminal
Audio out (pinjack): 1 pc.
Analogue audio output (L/R):
Standard: 0.5 Vrms,
Full scale: 2.0 Vrms at 1 kHz (< 1 k)
Digital audio out (optical): 1 pc.
Output format:
PCM, Dolby Digital, DTS
®
, MPEG
Digital audio out (coaxial): 1 pc.
Output format:
PCM, Dolby Digital, DTS
®
, MPEG
HDMI terminal
HDMI out (19 pin type A): 2 pc.
Output format:
PCM, MPEG, Dolby Digital,
Dolby Digital Plus, Dolby TrueHD,
DTS
®
, DTS-HD High Resolution Audio
TM
,
DTS-HD Master Audio
TM
This unit supports “HDAVI Control 5”
function.
Internal HDD capacity
2TB
Other terminals
USB Port (Type A): 2 pcs.
SD Card Slot: 1 pc.
Common Interface slot: 2 pcs.
LAN (Ethernet) Port: 1 pc.
10BASE-T/100BASE-TX
DMR-BST_BCT940EG_eng.book 118 ージ 2014年7月2日 水曜日 午後5時40分

Table of Contents

Related product manuals