Panasonic DMR-BWT955GL - LASER specification; Region Code; Playable discs; SD Card

35
*2: Recording time of DR mode may vary depending on the bit rate
of broadcasting.
LASER specification
Class 1 LASER Product
Wave length: 783 nm(CDs) 661 nm(DVDs)
405 nm(BDs)
Laser power: No hazardous radiation is emitted
with the safety protection
Region Code: DVD: #4
BD: Region B
Playable discs
BD-Video: (Blu-ray 3D,BD-LIVE)
BD-ROM Version 2.4
DVD-VIDEO: DVD-Video format
CD-DA: (Audio CD)
BD-RE: Based on Ver.2.1, other files(*4)
BD-RE DL: Based on Ver.2.1, other files(*4)
BD-R: Based on Ver.1.3 and LTH type
Ver.1.3, other files(*4)
BD-R DL: Based on Ver.1.3, other files(*4)
DVD-RAM: DVD Video Recording format,
AVCHD format
DVD-R: DVD-Video format(*3), AVCHD
format(*3), other files(*5)
DVD-R DL: DVD-Video format(*3), AVCHD,
format(*3),
other files(*5)
DVD-RW: DVD-Video format(*3), DVD Video
Recording format, AVCHD for-
mat(*3)
+R: DVD-Video format(*3), AVCHD
format(*3)
+R DL: DVD-Video format(*3), AVCHD
format(*3)
+RW: DVD-Video format(*3), AVCHD
format(*3)
CD-R: CD-DA, other files(*6)
CD-RW: CD-DA, other files(*6)
*3: Finalizing is necessary.
*4: BD disc that is including other file needs to be based on UDF
format.
*5: DVD disc that is including other dile need to be based on UDF or
ISO9660 format.
*6: CD disc that is including other file need to be based on ISO9660
format.
SD Card
SD Memory Card (includes SDHC,SDXC card)
Format:
SD Card only FAT12,FAT16
SDHC Card only FAT32
SDXC Card only exFAT
USB device
USB 2.0 High Speed
USB mass storage device class is
supported.
Format: FAT12, FAT16, FAT32,
NTFS
Dimensions:
430mm(W) x 70mm(H) x 199mm(D) (exluding the projecting parts)
430mm(W) x 70mm(H) x 210mm(D) (inluding the projecting parts)
Mass: Approx .3.0kg
Solder: This model uses lead free
solder(PbF).
Note:
Specifications are subject to change without notice.
Useable capacity will be less.(SD Card)