41
PLEASE
WAIT
Unit is in termination
process
Unit is in termination process now.
“BYE” is displayed and power will be turned
off.
In case “Quick Start” of setup menu is ON, it
is displayed in restoration operation for AC
off.
No display
The character indication flows
sideways.
UNFORM-
AT
Unformatted disc error You have inserted an unformatted BD-RE,
BD-R. DVD-RAM or DVD-RW that is unfor-
matted or recorded on other equipment.
The character indication flows
sideways.
IR ERR
IR communication error [IR ERR] is displayed when communication
between Timer microprocessor and IR
microprocessor fails.
No display
No REC
Recording is impossible [No REC] is displayed when recording is
impossible due to the defect, dirt or wound of
media.
No display
HDD
ERROR
[HDD ERR] is displayed
when start up of HDD was
failed.
(Except error of setting of
Power on Stand-by)
a) When normal start up was failed.
b) When start up at HDD boot was failed.
c) When start up from state of P-OFF was
failed.
d) When start up from state of HDD SLEEP
was failed.
[HDD ERR] is displayed when above each
start up of HDD was failed.
*In case b), tray opens automatically and
[HDDERR] is displayed until version up disc
is inserted.
No display
HDD NG
Power on Stand-by setting
error
[HDD NG] is displayed when power on
Stand-by setting of HDD is NG or when HDD
which power on Stand-by is not set to is
used.
Please try to replace HDD with genuine HDD
as service parts.
No display
NoERAS
Erase is impossible You cannot delete items on this disc.
The disc may be damaged. Use a new disc.
No display
NoWRIT Writing is impossible You cannot write to this disc.
The disc may be damaged. Use a new disc.
No display
PROG
FULL
Timer programmes are full There are already 32 timer programmes.
Delete unnecessary timer programmes.
No display
Error Code Diagnosis Contents Description Monitor Display Automatic FL display
To Next Page
Loading...
