Panasonic DMR-BWT955GL - Special Modes Setting; Rating password; Service Mode; BD-ROM history cleaning

42
7.1.2. Special Modes Setting
* The command is transmitted by attached remoSte control.
Item
FL Display Key Operation
Mode Name Description
Rating password The audiovisual level setting password is
initialized to “Level 8”.
While the unit is on, disc is not in
tray, press and hold [OK], [B] and
[Y] on the remote control at the
same time for more than 5 seconds.
-"00 RET" is displayed on the unit's
display.
Repeatedly press
[ ] on the
remote control or [POWER] on the
unit until.
"03 VL" is displayed on the unit's
display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Service Mode Setting every kind of modes for servicing.
*Details are described in “7.1.3. Service-
Mode at a glance”.
While the power is off, press and
hold [5], [9] and [R] on the remote
control at the same time for more
than 5 seconds.
-"70 RET" is displayed on the unit's
disply.
Repeatedly press
[ ] on the
remote control or [POWER] on the
unit until "80 SRV" is displayed on
the unit's disply.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The history has been
cleared.] is displayed for five seconds.
While the unit is on, disc is not in
tray, press and hold [6], [7] and [Y]
on the remote control at the same
time for more than 5 seconds.
-"50 RET" is displayed on the unit's
disply.
Repeatedly press
[ ] on the
remote control or [POWER] on the
unit until "51 NOP" is displayed on
the unit's display..
Press and hold [STOP] on the
remote control until "52 BRE" is dis-
played on the unit's display.
Press [OK] on the remote con-
trol or [OPEN/CLOSE] on the unit.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
While the power is off, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
-"00 RET" is displayed on the unit's
display.
Repeatedly press
[ ] on the
remote control or [POWER] on the
unit until "06 FTO" is displayed on
the unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Forced power-off When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON or EXT-LINK is ON,
execute "Forced Power-off" after releasing
Timer REC or EXT-LINK.
Display in P-off mode. Press [POWER] key over than 10
seconds.