61
9.3. Top Ornament Ass'y
1. Remove the 3 screws (A) to remove Top Ornament Ass'y.
2. Slide the Ornament Ass'y rearward and lift the Ornament
Ass'y in the direction of the arrows.
Caution:
1. In the process of component composition, please don't
damage the Function Buttons and TOP ORNAMENT
(COVER) ASS'Y Claws.
2. First, score on both sides of the screw, and then into the
middle screw while assembling.
9.4. Top Case
1. Remove the 2 screws (A) and 2 screws (B).
2. Slide the Top Case rearward and open the both ends at
rear side of the Top Case a little and lift the Top Case in
the direction of the arrows.
To Next Page
Loading...
