Panasonic DMR-EH80VEG - Component Board Removal; Main PCB Removal; Tuner, Converter, Decoder Removal; DVD-RAM Drive Removal

14.10. MAIN P.C.B.
1. Disconnect 5 Connectors.
2. Remove 2 Screws (A), and remove Main P.C.B.
14.11. TUNER / CONVERTER /
DECODER
1. Remove the solders.
2. Pull out the P.C.B. .
14.12. DVD-RAM DRIVE
1. Take out HDD FFC from Angle sideways.
2. Remove 3 Screws (B).
3. Lift up DVD-RAM Drive slightly.
4. Remove Wire Cable from Connector P15003.
5. Disconnect FFC from Digital P.C.B. .
35
DMR-EH80VEG / DMR-EH80VEB