COMPONENT VIDEO OUT
COMPONENT
VIDEO IN
COMPONENT
VIDEO OUT
DVD-Recorder
COMPONENT
VIDEO IN
COMPONENT
VIDEO OUT
DVD-Recorder
HDMI Settings
COMPONENT
VIDEO IN
Y PB PR
TV
65
65
ENTER
SELECT
RETURN
TAB
19
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
TV Aspect
Progressive
TV System
16:9
On
PAL
AV1 Output
Video
AV2 Settings
Audio input L/R
Audio cable
L - White
R - Red
Video cable
Y - Green
PB - Blue
PR - Red
COMPONENT VIDEO OUT terminal
The terminal can be used for INTERLACE or PROGRESSIVE output and deliver a
clearer picture than the S VIDEO OUT terminal. Connections via these terminals output
the colour difference signals (PB/PR) and the brightness signal (Y) separately.
Colours can be reproduced true to the original colour.
!
Connect the COMPONENT VIDEO OUT terminal of the unit with the
COMPONENT VIDEO IN of the TV unit. Use a video cable.
!
Always connect terminals with the same colour.
!
Connect the audio cables to the corresponding audio input terminals on the TV.
Connecting a TV with COMPONENT VIDEO input terminal
If your TV with LCD or plasma screen supports the progressive process, connect it
to the COMPONENT VIDEO OUT terminals.
If you want to enjoy full progressive video, set Progressive to [On].
Press FUNCTIONS.
!
Select [To Others] with and confirm with ENTER.
!
Select [Setup] with and confirm with ENTER.
!
Select [Connection] with , [Progressive] with , and confirm with ENTER.
!
Select the option [On] with and confirm with ENTER.
If the AV1 Output setting in the Setup menu is set to [RGB 1/2 ( without component )],
there is no output to the COMPONENT VIDEO OUT terminals.
!
Set this option to [Video ( with component )].
If the unit is connected to the TV via the S VIDEO OUT or the AV1 terminals,
output is Interlace regardless of the settings.
Progressive television picture
The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with a
picture aspect ratio of 16:9 is properly displayed. However, video material with an
image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust
the picture aspect ratio on your television, select the setting [Progressive - On].
With a normal television, the progressive output can cause the picture to flicker, even
if the television is progressive compatible.
Select the setting [Progressive - Off].
!
Conventional televisions
In normal television sets, the progressive output
process can lead to flickering, even if the
television is progressive-capable. Select the
setting [Progressive - Off].
Notes on progressive-capable televisions (PAL)
Progressive output Progressive output
Active Antenna
Off
LCD/plasma televisions or LCD projectors
If progressive output is used, high resolution, e.g.
DVD-Videos, can be viewed. COMPONENT VIDEO
OUT of this unit is connected with the COMPONENT
VIDEO IN of the television. Select the setting
[Progressive - On].
To Next Page
Loading...
