Getting started
VQT5C33
20
Settings
8 Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
9 Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 80)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
• Select “Yes” to proceed to “Easy Network
Setting”. (> 21)
• Select “No” to finish the Easy Setting.
To stop partway
Press [RETURN ].
To restart setup or change TV signal type
1 Press [FUNCTION MENU]. (> 18)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Auto Setup” in “DVB Tuning”, then
press [OK].
4 Select “Yes”, then press [OK].
• If you are asked to select the auto setup
method, refer to “Auto Setup”. (> 75)
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (> 25)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
7 Clock will be set automatically.
If the clock setting screen appears, set the
time manually (> 85, Clock).
•On
It is possible to start quickly from standby
mode.
•Off
Power consumption in standby mode is
minimized. (> 100)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
“Quick Start” is activated when the set time
comes.
DMR-HCT230_130EG_eng.book 20 ページ ２０１３年７月８日 月曜日 午後５時４２分
To Next Page
Loading...
