Panasonic DMR-HCT230 - Watching broadcasts

Watching broadcasts
VQT5C33
24
Watching broadcasts
Watchi ng
broadcasts
To switch to the channel you have previously
watched
Press [LAST VIEW ].
• This function will work only for the channels you
have watched for more than 10 seconds.
To switch to the radio channels or to the all
channels
Press [RADIO/TV].
• Selection of channel is made easy by creating a Favourite
of the channels. (> 75, Favourites Edit)
• When you are watching the 3D programme, subtitles and
TV Guide, etc., may not display correctly depending on the
settings. (> 43, 44, 3D Type, Signal Format)
Enter the PIN with the number buttons by
following the on-screen instructions.
• If you decide on a PIN, make a note it in case
you forgot it.
• PIN (except CAM’s) can be changed via “PIN
Entry”. (> 85)
• For CAM’s PIN, refer to your CAM’s operating
instructions.
To watch an encrypted broadcast, insert the CI
module into the CI slot. (> 12)
• Set according to the CI module. (> 73, 81,
Common Interface)
Instructions for operations are generally
described using the remote control. (> 10)
Press [CH WX] to select the channel.
• You can also select the channel by the
following operations.
- Using number buttons
- Using Channel List (> 25)
- Using TV Guide system (> 25)
- Using channel information (> 26)
If this unit request a PIN
If encrypted channels do not appear
DMR-HCT230_130EG_eng.book 24 ページ ２０１３年７月８日 月曜日 午後５時４２分