Panasonic DMR-HST270 - Basic Settings: Tuning and Channel Management; Digital TV Tuning and Channel List; Auto Setup and Manual Tuning

Setup
TQBS0165
52
Basic Settings
You can change the unit’s settings of Digital TV
Tuning, Sound, Display, Connection, Network etc.
in the menu.
1 Press [FUNCTION MENU].
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select the menu, then press [OK].
4 Select the item, then make the setting.
To return to the previous screen
Press [RETURN ].
Digital TV Tuning
Favourites Edit
You can create four favourites of channels for
making viewing and recording easier.
After editing as follows, save the Favourites.
Press [RETURN ], then press [OK].
• To select the other Favourites list:
Press the green button.
• To add channels to the Favourites list:
Select the channel in the “All Channels”
column, then press [OK]. Repeat this step.
• Yellow: Add all the available channels to the
Favourites. (This function is available only
when there are no channels in the
“Favourites”.)
• To change the order of the channels list:
1 Select the channel in the “Favourites”
column to move, then press the green
button.
2 Select the new position, then press the
green button.
Setup
Basic Settings
OK
RETURN
Digital TV Tuning
HDD / USB HDD
Picture
Sound
Display
Connection
Network
Others
• To delete channels:
Select the channel in the “Favourites” column,
then press [OK].
• Yellow: Delete all channels.
• To change the name of the Favourites list:
1 Press the red button in the “Favourites”
column.
2Press [3, 4, 2, 1] to select a character,
then press [OK].
Repeat this step to enter other characters.
• Red: Delete a character.
• Blue: Delete all characters.
3 Press [RETURN ].
Auto Setup
You can restart the Auto Setup. (> 11)
1 Select “Yes”, then press [OK].
2 Select “Start Tuning”, then press [OK].
• The timer recording programmes are cancelled.
Settings for Channels
Channel List
You can edit the channel list.
• To hide unwanted channels
1 Select the channel.
2 Press [OK].
The check mark is removed.
• Yellow: Reveal all channels.
• To move the channel number assignment
1 Select the channel to move, then press
the green button.
2 Enter the channel number to reassign
with the number buttons.
3 Press [OK].
• To set the channel manually
1 Press the red button.
2 Refer to “Manual Tuning”. (> below)
Manual Tuning
You can add new channels manually.
• This setting is displayed only when Auto
Setup is run with “Search Mode” set to
anything other than “Freeview Channels”.
(> above)
DMR-HST270GZ_eng.book 52 ページ ２０１７年１２月２６日 火曜日 午後５時４７分