Panasonic DMR-HW100EBK - To Confirm and Edit a Timer Programme

Recording
VQT3F57
35
Press [PROG/CHECK].
To deactivate a timer programme
Select the programme, then press the “Red” button.
≥The timer icon “F” (> right) will change from red to
grey.
≥Press the “Red” button again to activate timer
recording standby. (The timer icon “F” will change
to red.)
To delete a timer programme
Select the programme, then press [DEL].
To edit a timer programme
1 Select the programme, then press [OK].
2 Change the timer recording options.
(> 34, Timer recording options)
To resolve overlapping
1 Select the programme with , then press the
“Green” button.
2 Follow the on-screen instructions.
≥Programme overlapping can be resolved with
repeat programme if available.
≥This function is not available for the timer
programmes that were set manually.
To show programme information
Press [STATUS ].
To exit the timer recording list
Press [EXIT].

≥ Failed programmes are deleted from the timer recording
list at 4 a.m. two days later.
≥ “No Data” is displayed on a series recording item if there
will be no episode of the series for the next 8 days. We
recommend you delete the “No Data” item after you
confirm the last episode of the series is recorded.
To confirm and edit a timer
programme
Channel Name Schedule Space
New Timer Programme
OK
RETURN
Page Up
Page Down
CH
Turn
Timer Off
Total 4/32
Resolve overlap
Timer Recording
30:30
HDDRemain
WED 13/10/2011 19:50
DEL
Delete
Info
MON 18/10
22:00 - 23:00
MON 18/10
23:05 - 23:35
MON
23:15 - 23:30
MON 18/10
23:20 - 23:50
OK
OK
!
HD
HD
-->
22/11
Icons
Screen icons
F Red: Timer recording standby is activated.
Grey: Timer recording standby is deactivated.
[ Currently recording programme
A part or all of the programme will not be
recorded since the programme is overlapping.
Press the “Green” button to resolve
overlapping. (> left)
The HDD is full.
Copy-protected programme
It was not recorded.
The programme did not complete recording
because of some reason.
Auto Renewal Recording is set (> 34).
Guide Link (> 32)
Split Programme (> 32)
Series Timer Recording (> 32)
OK Displayed if the recording can fit in the
remaining space
>
(Date)
Daily or weekly timer programme is set. (up
to a maximum of one month from the present
time)
! It may not be possible to record because:
–there is not enough space left.
–the number of possible titles has reached its
maximum. (> 96)
–programmes are deactivated, etc.
Guide
S/P
DMR-HW100EB-VQT3F57_eng.book 35 ページ ２０１１年８月５日 金曜日 午後２時４分