Recording
SQT0815
38
Timer recording
2 Select the programme, then perform the
operations.
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DELETE].
To resolve an overlap timer programme
Press the green button.
• The overlapped timer recording list will
appear. (> 33, 35)
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 36)
3 Press [OK].
To show programme information
Press [STATUS ].
To exit the timer recording list
Press [EXIT ].
To confirm and edit a timer
programme
1 Display the Timer recording list.
1 Press [FUNCTION MENU].
2 Select “Timer Recording”, then press
[OK].
• [For_A us t ralia] The timer recording list can be displayed
directly by pressing [PROG/CHECK].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD TUE 06.01.2015 XXXXXX
Delete
Info
New Timer Programme
TUE 14.01
TUE 14.01
XXXXXX - XXXXXX
XXXXXX - XXXXXX
XXXXXX - XXXXXX
XXXXXX - XXXXXX
TUE 14.01
TUE 14.01
DR
HG
DR
DR
OK
OK
Resolve overlap
Guide
Guide
Screen icons
F Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[ Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
• Programme overlapping can be resolved
with repeat programme if available.
Select the programme, then press the
green button.
(> 33, 35, If “Overlapped Timer
Recording” screen appears)
• This function is not available for the timer
programmes that were set manually.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set. (> 36)
Guide Link (> 36)
Series Timer Recording (> 33, 35)
OK Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
! It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has reached
its maximum. (> 8)
- programmes are deactivated, etc.
[For_ New_Ze ala nd]
Split Programme (> 35)
DMR-PWT550GLGZ_eng.book 38 ページ 2015年2月2日 月曜日 午後7時26分