Editing video
SQT0815
50
Deleting/Editing titles
To cancel a “Now” conversion
Press and hold [RETURN ] for more than
3 seconds.
To confirm whether the conversion is
completed
Press [VIDEO MENU].
When “±± > ±± (Recording mode for
conversion)” is displayed, the conversion has not
finished.
To cancel a “During standby” conversion
After performing steps 1–2 (> 47, Editing
recorded titles)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
e.g.,
Start Time
Prog.Type:
Rec time
Channel Date Title Name Titles
Movie
XXXXX
1:00(DR HL)
• To use “File Conversion”, the HDD needs enough storage
capacity.
• The size of converted title might increase depending on the title.
• File Conversion is stopped when this unit is turned on
during performing “During standby” conversion. Conversion
will start from the beginning again once the unit is switched
to standby mode.
• When converted, 3D information may not be retained.
• In titles with the Auto Renewal Recording function (> 36)
set, a programme may be unintentionally converted while in
“During standby”.
• [For_Aust ralia] When converted, the audio content will be
selected according to the following settings:
- “Audio Type for Digital Broadcast” (> 71, 77)
• [For_New_Zealand] When converted, the audio content and
subtitle language will be selected according to the following
settings:
- “Multi Audio” of “Preferred Language” (> 71, 74)
- “Subtitles” of “Preferred Language” (> 71, 74)
- “Audio Type for Digital Broadcast” (> 71, 77)
DMR-PWT550GLGZ_eng.book 50 ページ ２０１５年２月２日 月曜日 午後７時２６分
To Next Page
Loading...
