Panasonic DMR-PWT560 - Troubleshooting: Video and Screen Issues; Video Display and Image Problems

Reference
SQT1112
72
Screen size is wrong.
• Check the “TV Aspect” or “Aspect for 4:3 Video”.
(> 66)
• Adjust the aspect ratio setting on TV.
• Adjust the aspect ratio setting on this unit. ( > 61)
• Check “Aspect for Recording” before recording
or file conversion. (> 64)
The black screen appears on the TV.
• This phenomenon may occur, depending on the
TV setting, when “Quick Start” is activated.
Depending on the TV, this phenomenon may be
prevented by reconnecting to a different HDMI
input terminal.
TV reception is not displayed.
• Broadcast signals are not output from this unit’s
RF OUT terminal. Select “On” in “RF OUT
( Aerial Signal )”. (> 69)
The screen changes automatically.
• If “Screen Saver” set to “On”, the screen saver
function will be activated when there is no
operation for 5 minutes or more. (> 66)
There is a lot of image lag when playing video.
• Set to “0” all items in the “Noise Reduction”.
(> 40)
• Set “Audio Delay”. (> 66)
The images do not appear on the TV.
The picture is distorted during play, or video
is not played correctly.
• Check the connections. (> 9)
• Check the settings of the connected TV, etc.
• An incorrect resolution is selected in “HDMI
Video Format”. (> 66) Reset the setting as
follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• “00 RET” is displayed on the front panel
display.
2 Repeatedly press [1] (right) until “04 PRG”
is displayed on the front panel display.
3 Press and hold [OK] for at least 3 seconds.
Set the item again.
• When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD
®
audio are not output
properly, select “Yes” in “Default Settings”
and make proper settings. (> 70)
• The unit’s TV System is different from that of the
disc. Change the TV System. (> 66, TV
System)
• The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
• Set “Deep Colour Output” (> 67) or “Contents
Type Flag” (> 67) to “Off”.
• The country setting is not set correctly. Perform
“Shipping Condition” (> 70) first, and then set
the country you live in again.
TV screen and video
DMRPWT560GN_eng.book 72 ページ ２０１６年４月１４日 木曜日 午後１時９分