732
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.3.2.2. Feed / Drive System
11.3.2.2.1. Outline
The Machine performs the following in response to the commands coming from its host machine on the
sheets arriving from the Host Machine for delivery: simple stacking, job offset, and stapling or folding (in
two).
If a Punch Unit (option) is installed, the sheets are punched and delivered to the Delivery Tray.
Sheets may be delivered in either of five ways (including one for the Punch Unit):
Fig. 2-010
1. Normal Delivery
a. Simple Stacking
The Machine pulls in the sheet once to the processing tray and then delivers it to the Delivery Tray.
Fig. 2-011
Delivery
method
Normal
delivery
Punching Simple stacking
Job offset
Stapling Front 1-point stapling
Stitching Middle 2-point stapling
Rear 1-point stapling
Middle 2-point stapling
Saddle delivery
Tray
Paper
To Next Page
Loading...
