Panasonic DP-3530 - Page 615

615
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2. Removing the Upper Cover.
11.1.5.3.2. Puncher Driver System
1. Removing the Punch Motor.
2. Removing the Horizontal Registration Motor.
Fig. 5-065
(1) Open the Front Door [1], remove 3 Screws [2],
and slacken the inner side of the Right Cover [3]
to remove the Upper Cover [4] from the hook.
Fig. 5-066
(1) Remove the Upper Cover. (See Fig. 5-066.)
(2) Disconnect 1 Connector [1].
(3) Remove 2 Screws [2], and remove the Punch
Motor [3].
Fig. 5-067
(1) Remove the Right Guide Assembly.
(See Fig. 5-065.)
(2) Disconnect 1 Connector [1].
(3) Remove 2 Screws [2], and slide the Horizontal
Registration Motor [3] in the direction of the
arrow.
[4]
[5]
[3]
[2]
[4]
[2]
[1]
[1]
[3]
[2]
[1]
[3]
[2]