Panasonic DP-3530 - Page 616

616
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
3. Removing the Punch Slide Unit.
Fig. 5-068
Caution:
Exercise care as the Punch Slide Unit opens when
it is removed.
If necessary, perform operations with the Punch
Slide unit open.
(1) Remove the Right Guide Assembly.
(See Fig. 5-065.)
(2) Remove the Upper Cover. (See Fig. 5-066.)
(3) Remove the Photosensor PCB. (See Fig. 5-078.)
(4) Hold the 2 Lock-type Tie Wraps [1] between your
fingers to remove. (Exercise care not to cut the
Tie Wraps when removing.)
(5) Disconnect 3 Connectors [2].
(6) Remove Harness Lead [4] from the 3 Harness
Stops [3].
Fig. 5-069
(7) Remove the E-Ring [5], and Puncher Spring [6].
[2]
[2]
[1]
[1]
[4]
[3]
[3]
[3]
[6]
[5]