617
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Fig. 5-070
(8) Rotate the Gear [7] in the direction of the arrow,
and slide the Punch Slide Unit Assembly [8] to
the front.
Fig. 5-071
(9) Disconnect the Connector [9], and remove 1
Screw [10] and Horizontal Registration Home
Position Sensor [11].
Fig. 5-072
(10) Remove 2 Screws [12] and Sensor Base [13].
[8]
[7]
[9]
[11]
[
10
]
[12]
[12]
[13]
To Next Page
Loading...
