696
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(6) Remove the Path Select Gate (1 E-Ring)
(Adjustment of the Gate Solenoid). Adjust the
solenoid bracket mounting position so that the
Gate Arm is contacting the Solenoid.
13. Removal of the Belt Drive Motor
(1) Remove the Outer Covers.
(2) Remove the Drive Belt.
(3) Remove the Belt Drive Motor Unit
(3 Screws and 1 Connector).
(4) Remove the Belt Drive Motor Mounting Bracket 1
(2 Screws).
(5) Remove the Pulley (1 E-Ring).
(4)
(6)
(2)
(3)
(5)
(4)
(4)
To Next Page
Loading...
