Panasonic DP-4530 - Page 216

216
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2. Output Check
Press the "START" key to start and press the "STOP" key to reset.
F4 Mode (Output Check)
No. Item Function Remark
040-
049
Not Used
050 Main Motor Activate the Main Motor after
pressing Start key.
051 Toner Bottle Motor Rotation In
Forward Direction
When CN719-3 signal level changes
to 0V from +24V, motor rotates in the
forward direction.
052 Toner Bottle Motor Rotation In
Reverse Direction
When CN719-6 signal level changes
to 0V from +24V, motor rotates in the
reverse direction.
053 Suction Fan / Dust Fan When CN758-11 is 24V, Suction Fan
rotates.
When CN758-6 is 24V, Dust Fan
rotates.
054 Not Used
055 Ozone Fan 2 When CN758-5 is 24V, Ozone Fan 2
rotates.
056 Exhaust Fan 1/2/3 When CN757-5 is 24V, Exhaust Fan
1 rotates.
When CN759-5 is 24V, Exhaust Fan
2 rotates.
When CN759-6 is 24V, Exhaust Fan
3 rotates.
057 Power Supply Fan When CN758-12 is 24V, Power
Supply Fan rotates.
058 Not Used
059 Separator Solenoid When CN764-2 signal level changes
to 0V from +24V, solenoid operates.
060 Mg Roller Clutch When CN764-4 signal level changes
to 0V from +24V, clutch operates.
061 Registration Clutch When CN716-6 signal level changes
to 0V from +24V, clutch operates.
1 minute
062 Total Counter When CN768-5 signal level changes
to 0V from +24V, counter operates.
100 ms
For DP-3530/4530/6030
only
063 Key Counter When CN768-2 signal level changes
to 0V from +24V, counter operates.
064 Not Used
065 Paper Feed Roller Clutch
(1st Paper Tray)
When CN712-2 signal level changes
to 0V from +24V, clutch operates.
1 minute
066 Paper Feed Solenoid
(1st Paper Tray)
When CN712-4 signal level changes
to 0V from +24V, solenoid operates.
2 seconds
067 Lift Motor
(1st Paper Tray)
When CN713-2 signal level changes
to 0V from +24V, motor rotates in the
ascending direction.
068 Intermediate Roller Clutch When CN714-4 signal level changes
to 0V from +24V, clutch operates.
1 minute
069 Not Used