Panasonic DP-4530 - Appendix; Specifications

217
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
070 Paper Feed Roller Clutch
(2nd Paper Tray)
When CN710-2 signal level changes
to 0V from +24V, clutch operates.
1 minute
071 Paper Feed Solenoid
(2nd Paper Tray)
When CN710-4 signal level changes
to 0V from +24V, solenoid operates.
2 seconds
072 Lift Motor
(2nd Paper Tray)
When CN711-2 signal level changes
to 0V from +24V, motor rotates in the
ascending direction.
073-
074
Not Used
075 Paper Feed Roller Clutch
(3rd Paper Tray)
When CN607-3 signal level changes
to 0V from +24V, clutch operates.
1 minute
076 Paper Feed Solenoid
(3rd Paper Tray)
When CN607-4 signal level changes
to 0V from +24V, solenoid operates.
2 seconds
077 Lift Motor
(3rd Paper Tray)
When CN603-2 signal level changes
to 0V from +24V, motor rotates in the
ascending direction.
078 Clutch
(System Console)
When CN608-5 signal level changes
to 0V from +24V, clutch operates.
1 minute
079 Drive Motor
(System Console)
When CN602-8 signal level changes
to 0V from +5V, motor rotates.
080 Paper Feed Roller Clutch
(4th Paper Tray)
When CN608-3 signal level changes
to 0V from +24V, clutch operates.
1 minute
081 Paper Feed Solenoid
(4th Paper Tray)
When CN608-4 signal level changes
to 0V from +24V, solenoid operates.
2 seconds
082 Lift Motor
(4th Paper Tray)
When CN604-2 signal level changes
to 0V from +24V, motor rotates in the
ascending direction.
083-
084
Not Used
085 Paper Feed Roller Clutch
(Sheet Bypass)
When CN714-6 signal level changes
to 0V from +24V, clutch operates.
1 minute
086 Paper Feed Solenoid
(Sheet Bypass)
When CN718-2 signal level changes
to 0V from +24V, solenoid operates.
2 seconds
087-
090
Not Used
091 Paper Feed Solenoid
(LCT)
When CN554-2 signal level changes
to 0V from +24V, solenoid operates.
2 seconds
092 LCT Paper Tray Lift (Up) Motor rotates in the ascending
direction.
(together with upper limit control)
093 LCT Paper Tray Lift (Down) Motor rotates in the descending
direction.
(together with lower limit control)
094 Paper Feed Motor
(LCT)
Motor rotates.
095-
099
Not Used
100 ADU Paper Exit Clutch When CN714-2 signal level changes
to 0V from +24V, clutch operates.
1 minute
F4 Mode (Output Check)
No. Item Function Remark