Panasonic DP-4530 - Page 775

775
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Fig. 3-019
(1) Detach the Gear Cover [2] from the Staple Driver
[1].
(2) Remove the E-Ring [3] to detach the Side Cover
[5] of the Stapler Clincher [4].
Fig. 3-020
(3) Remove 2 E-Rings [6] to remove the Staple Jam
Releasing Gear [7], Timing Belt [8], and Relay
Gear 1 [9]. Remove the Spacer and Spring at the
back of the Staple Jam Releasing Gear.
(4) Remove 1 Screw [10] and Spring [11] to remove
the Belt Tentioner [12].
Fig. 3-021
(5) Remove the Timing Belt [13].
(6) Remove 1 E-Ring [14] to remove the Staple
Position Check Gear [15].
[4]
[1]
[2]
[5]
[3]
[7]
[6]
[11]
[8]
[9]
[10]
[12]
[14]
[13]
[15]