Panasonic DP-4530 - Page 781

781
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Fig. 3-038
(7) Remove the Stop Ring [10], the flange [15], and
detach the Timing Belt [11].
(8) Disconnect the Connector [12], and free the
Harness [14] from the Edge Saddle [13].
Fig. 3-039
(9) Remove 2 Screws [15], and slide the Processing
Tray Assembly [16] to the rear; then, lift it to
detach.
[12]
[14]
[13]
[10]
[15]
[11]
[16]
[15]