782
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Fig. 3-040
2-6. Removing the Paddle Assembly
(1) Remove the Processing Tray Assembly.
(See 2-3.)
(2) Place the Processing Tray Assembly [1] as
shown.
Caution:
Be sure to take care not to damage the Aligning
Plate [2].
Fig. 3-041
(3) Detach the Timing Belt [3], and remove 2 Screws
[4].
Fig. 3-042
(4) Separate the Processing Tray Assembly [5] and
the Paddle Assembly [6] as shown.
[1]
[2]
[4]
[4]
[3]
[6]
[5]
To Next Page
Loading...
