218
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
101 ADU Paper Feed Clutch When CN716-4 signal level changes
to 0V from +24V, clutch operates.
1 minute
102 Inverting Motor Rotating In
Forward Direction
Inverting motor rotates in the forward
direction.
103 Inverting Motor Rotating In
Reverse Direction
Inverting motor rotates in the reverse
direction.
104 Paper Guide Solenoid ON When CN763-10 signal level
changes to 0V from +24V, clutch
turns ON for Straight Paper Exit.
105 Paper Guide Solenoid OFF When CN763-12 signal level
changes to 0V from +24V, clutch
turns OFF for Inverting Paper Exit.
106 Roller Solenoid ON When CN763-7 signal level changes
to 0V from +24V, clutch turns ON for
the Inverting Roller OFF.
107 Roller Solenoid OFF When CN763-9 signal level changes
to 0V from +24V, clutch turns OFF for
the Inverting Roller ON.
108 Saddle Paper Feed Unit Test Feed Motor turns ON. 2-Bin Saddle-Stitch
Finisher (FS605) Only.
109 Tray Elevator Unit Test 1 Tray moves to Upward direction. 2-Bin Finisher (FS600),
2-Bin Saddle-Stitch
Finisher (FS605) and
2-Bin Finisher (FS330).
110 Tray Elevator Unit Test 2 Tray moves to Home Position.
111 Paper Feed Unit Test Feed Motor turns ON.
112 Paper Exit Unit Test Feed Motor turns ON. 2-Bin Finisher (FS600),
2-Bin Saddle-Stitch
Finisher (FS605) and
1-Bin Saddle-Stitch
Finisher (FS355A).
113 Collation Unit Test Collation Plates turns ON.
114 Stapler Unit Test Stapler turns ON.
115 Stapler Unit Move Test Stapler Unit moves. 2-Bin Finisher (FS600) and
2-Bin Saddle-Stitch
Finisher (FS605).
116 Rocking Unit Test Guide turns ON. 2-Bin Finisher (FS600),
2-Bin Saddle-Stitch
Finisher (FS605) and
2-Bin Finisher (FS330).
117 Shutter Unit Open Test Shutter unit is opened.
118 Not Used
119 Shutter Unit Close Test Shutter unit is closed. 2-Bin Finisher (FS600) and
2-Bin Saddle-Stitch
Finisher (FS605).
120 Lamp When CN756-8 signal level changes
to 0V from +24V, Lamp operates for
4 seconds.
121-
159
Not Used
160 ADF Paper Feed Motor Rotating
(67% of rotating speed)
ADF paper feed motor rotates at
67% of rotating speed.
F4 Mode (Output Check)
No. Item Function Remark
To Next Page
Loading...
