Panasonic DP-6030 - Page 220

220
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
5.1.4. F5 Mode: Function Parameters (For Copier)
Set the machine to Service Mode and press "5" key on the Keypad.
↓
Press the "START" key.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another code number, scroll the menu with the arrow buttons.
↓
Select the desired function on the Touch Panel display and touch the "OK" button.
↓
When the "C (CLEAR)" key is touched, the selected code input will not be accepted.
↓
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F5 Mode
No. Item Function Default Setting
00 Country Version 0 : Japan
1 : USA/CAN
2 : Europe
3 : Other
Country Dependent
01 Frequency Desired 0 : Auto
1 : 50 Hz
2 : 60Hz
2 (for USA / Canada)
1 (for Europe)
02 Not Used
03 LSU Startup Speed 0 : Low
1 : Full
1
04 LSU Off Timer 1 : 5 sec.
2 : 10 sec.
3 : 15 sec.
4 : 20 sec.
6 : 30 sec.
8 : 40 sec.
10 : 50 sec.
12 : 60 sec.
3
05-
06
Not Used