510
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.1.2.2. Feed / Drive System
11.1.2.2.1. Outline
The Finisher is designed to operate according to the commands from its Copier to deliver arriving copies to
trays in the appropriate mode: simple stacking, job offset, stapling.
See Fig. 2-009 for a diagram of the 4 delivery modes.
Fig. 2-009
Fig.2-010
Method of delivery Normal delivery
Saddle stitch delivery
Simple stacking
Job offset
Staple Front diagonal
Rear 1-point
Rear diagonal
2-point
Normal Delivery Tray
Normal Delivery Tray
To Saddle Stitch Unit
To Next Page
Loading...
