Panasonic DP-8032 - Page 178

178
DP-8032/8025
2008Ver.1.2
013 Paper Entrance Sensor Paper is detected. 1 1-Bin Finisher
(FS300). No. 013-014
(2525) Fig.28 H1
Paper Exit Sensor Paper is detected. 1 (2525) Fig.29 H6
Home Position Sensor Home position is
detected.
1 (2525) Fig.29 I6
Paper Level Sensor
Paper Hold Sensor
Paper Hold Lever is
outside.
00 (2525) Fig.26 D3
Paper level is
base line.
01
Paper Hold Lever is
inside.
10
Paper level is
upper limit.
11
Paper Upper Limit Sensor Paper Upper Limit is
detected.
1 (2525) Fig.25 E4
Paper Tray Full Sensor Paper Full is detected. 1 (2525) Fig.25 F3
Front Stapler Home Position
Sensor
Home position is
detected.
1
---014 Stapler Cartridge Sensor Stapler Cartridge is
detected.
1
Staple Sensor Staple is empty. 0
Stapler Unit Sensor Stapler Unit is detected. 1 (2941)
Stapler Cover Switch Cover is open. 0 (3018)
Top Cover Sensor Cover is open. 0 (2525) Fig.30 C3
Joint Detect Sensor Finisher Unit is not
detected.
0 (2525) Fig.30 G4
015-
019
Not Used
020 Size Sensor C Original detected on the
C position.
1
(269)
Size Sensor B Original detected on the
B position.
1
Size Sensor A Original detected on the
A position.
1
Size Sensor Z Original detected on the
Z position.
1
Size Sensor Y Original detected on the
Y position.
1
Size Sensor X Original detected on the
X position.
1
F4 Mode (Input Check)
No. Function Condition
Message
Display
Remarks
(Ref.No.)
76543210
ABC
X
Y
Z
Platen
Front Side