Panasonic DP-C305 - Page 137

137
DP-C405/C305/C265
FEB 2008Ver. 1.1
Note:
When reinstalling the Snap Ring, use a pair of
pliers as illustrated.
(50) Reinstall the 4 FTR.
Note:
Reinstall the FTR by turning over the Protective
Sheet.
Note:
When reinstalling the FTR, the direction is not
critical, and it can be installed in either direction as
illustrated.
(51) Bend the IT Unit at the bending point up to the
maximum bending position.
(52) Carefully install the new IT Belt.
Caution:
When installing the new IT Belt, follow the
description of the label on the Unit’s frame.