532
DP-C405/C305/C265
FEB 2008Ver. 1.1
300 Adj 100% Side-Side Read Identical vertical (side-to-side) size ratio (FB,
ADF) adjustment.
-9 ~ +9
0.1%
301 100% Selection Select from 99.1% to 100.9% adjustment. (FB,
ADF).
-9 ~ +9
0.1%
302-
304
Not Used
305 Original Registration Platen original registration detection timing
adjustment.
-30 ~ +30
0.2 mm
306 Trail Edge Read Timing Trail edge void adjustment. -9 ~ 0
0.5 mm
307 CCD Read Position Adj CCD read position adjustment. -50 ~ +50
0.2 mm
308 Adj 100% Lead-Tail Read Identical horizontal (top-to-bottom) size ratio
adjustment.
-9 ~ +9
0.1%
309 FB Shading Position Shading position offset (FB) adjustment. -10 ~ +10
0.1 mm
310 FB Lead Void Setting Registration edge void (FB) adjustment. 0 ~ +9
0.5 mm
311 FB Side Void Setting Registration side void (FB) adjustment. 0 ~ +9
0.5 mm
312 FB Trail Void Setting Registration trail void (FB) adjustment. 0 ~ +9
0.5 mm
313 Not Used
314 ADF Shading Position
(DP-C405 Series Only)
Shading position offset (ADF) adjustment. -3 ~ +3
0.03 mm
315 ADF Lead Void Setting Registration edge void (ADF) adjustment. 0 ~ +9
0.5 mm
316 ADF Side Void Setting Registration side void (ADF) adjustment. 0 ~ +9
0.5 mm
317 ADF Trail Void Setting Registration trail void (ADF) adjustment. 0 ~ +9
0.5 mm
318-
319
Not Used
320 Stamp Position Adjust Verification Stamp position adjustment. -50 ~ +50
0.3 mm
321 ADF Reverse Stop Posi. ADF reverse stop position adjustment. -99 ~ +99
0.3 mm
322 ADF Exhaust Stop Posi. ADF ejection stop position adjustment. -99 ~ +99
0.3 mm
323 ADF Feed Regist. 1-Sided Individual Fine Adjustment for ADF 1 sided. -99 ~ +99
0.3 mm
324 ADF Feed Regist. 2-Sided Individual Fine Adjustment for ADF 2 sided. -99 ~ +99
0.3 mm
325 ADF Read Main Scan Pos. ADF horizontal image read start position
adjustment.
-99 ~ +99
0.05 mm
326 Original Lead Edge ADF ADF Original Lead Edge adjustment. -99 ~ +99
0.3 mm
327 Original Trail Edge ADF ADF Original Trail Edge adjustment. -99 ~ +99
0.3 mm
F6 Mode
No. Item Remarks Setting Range
To Next Page
Loading...
