733
DP-C405/C305/C265
FEB 2008Ver. 1.1
(12) Replace 1 Harness Clamp (from Small to Large).
(13) Replace 1 Harness Clamp (from Medium to
Large).
(14) Secure the Harnesses with the Harness Clamps.
(15) Connect the Counter Relay Harness to CN902
on the Coin Vendor PCB.
(16) Connect the Counter Relay Harness and Relay
Harness (A).
(17) Secure the Harnesses with the Harness Clamps.
(18) Connect the Harness (B) to CN530, and CN531
on the EC PCB.
To Next Page
Loading...
