777
DP-C405/C305/C265
FEB 2008Ver. 1.1
2. Processing Tray Paper Stacking Operation
A sheet coming between the Delivery Rollers is fed onto the Processing Tray. Then, the Paddle Taps
on the sheet surface twice (once for the second and subsequent sheets) to position the sheet against
the Processing Tray Stopper.
Fig.2-018
3. Offset Operation
Each sheet is pulled forward, or backward using the Aligning Plate (Front) and the Aligning Plate
(Rear).
The offset operation is performed each time a sheet is pulled onto the Processing Tray.
Fig. 2-019 Offsetting in the forward direction
Fig. 2-020 Offsetting in the backward direction
Paper
Aligning Plate
Paddle
Stack Delivery Roller (Upper)
Swing Guide
Processing Tray Stopper
Stack Delivery Roller (Lower)
Delivery Belt
Aligning Plate (Rear)
Aligning Plate (Front)
Sheet to be offset
Tray
Aligning Plate (Rear)
Aligning Plate (Front)
Sheet to be offset
Tray
To Next Page
Loading...
