Panasonic DP-UB9000 - Setup for TV, Projector, and Amplifiers; 4 K TV, Projector, and Amplifier Configuration

Getting started
- 15 -
Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector and an
amplifier that is connected to the DIGITAL AUDIO OUT/Analogue AUDIO OUT terminals
HDMI INHDMI IN
HDMI cable
HDMI cable
(18 Gbps)
Projector
(2K-compatible)
Amplifier/receiver
Setting
Set the following items in the Setup menu ( 30):
≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. ( 30)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. ( 30)
≥ To enjoy audio with an amplifier connected to the OPTICAL/COAXIAL terminal or 2ch AUDIO OUT
terminals:
Set “Audio Output” to “Off” in “Advanced Settings”. ( 31)
≥ To enjoy audio with an amplifier connected to the 7.1ch AUDIO OUT terminals:
Set “Analogue Multi Channel” to “On”. ( 33)
≥ To enjoy audio with a TV
Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. ( 30)
Set “Audio Output” to “On” in “Advanced Settings”. ( 31)
≥ To enjoy video with a projector
Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. ( 30)
(It is not possible to output 3D, 4K or HDR content from the HDMI AUDIO OUT/HDMI VIDEO OUT
terminal when “Video+Audio” is selected.)