Basic Operations
14
RQT6050
Preparations
≥Prepare the power supply (➡ pages 12 and 13).
≥Open the outer cover.
≥
When connected to a television (➡ pages 34 and 35), turn on the television and select the
appropriate video input on the television to suit the connections for the player.
1 Press [OPEN] to open the disc lid and
insert a disc with the side you want to
play label up.
≥Remove TYPE 2 and 4 discs from their
cartridges before use (➡ page 11).
≥Close the disc lid by hand.
2 Press [1, ON] to start play.
The unit comes on automatically.
See right if a menu appears.
3 Adjust the volume.
Basic play
∫ To stop play
Press [∫] (➡ page 15, Resume function).
∫ To pause play
Press [;] during play.
Press [1] (Play) to restart play.
∫ To turn the unit off
Press and hold [∫, – OFF] until
“OFF” appears on the LCD.
∫ Turning the unit on and off with the
remote control
Press [Í].
≥You cannot use the remote control to turn
the unit on when it is being powered by the
battery.
∫ To see the elapsed play time
Press [DISPLAY] to show the GUI screens
(➡ page 24).
∫ Auto standby
The unit automatically turns off after being
stopped for 15 minutes (5 minutes when the
battery is being used).
Note
≥If “$” appears on the LCD
≥The operation is prohibited by the unit or
disc.
≥When the disc ends
≥If you have finished using the unit, turn it
off to conserve power.
≥The surface of the unit may become warm
if it is used for a long time, but this is nor-
mal and not an indication of malfunction.
≥The [Í] indicator on the unit flashes to
indicate the unit is on when the monitor’s
mode is set to “OFF” (no picture)
(➡ page 21) or the outer cover is closed.
Clicks
The menu language is set to English, but you can change it as follows
(➡ page 39, Display—Menu Language). English is used in the examples.
English>French/German/Italian/Spanish
English>French/Spanish
For Asia
For the United Kingdom, Continental Europe and Russia
To Next Page
Loading...
