Advanced Operations
24
RQT6050
GUI (Graphical User Interface) screens are menus that contain information about the disc
or unit. These menus allow you to perform operations by changing this information.
∫ Operations available only with GUI screens
Chapter select, Elapsed play time, Still picture page number, Digital picture mode, Dialogue
Enhancer, Bit-rate display, A-B repeat play, Repeat play, Marker.
Common procedures
Using GUI screens CDVCDDVD-VDVD-ARAM
1 Press [DISPLAY].
Each time you press the button:
Example: DVD-Video
GUI screen for disc information
;
GUI screen for unit information
(➡ step 2)
;
Shuttle screen
;
Original display
≥The screens depend on the disc
contents.
While the leftmost icon is highlighted
2
Use [3, 4] to select the menu.
Each time you use the cursor jockey:
GUI screen for unit information only
4 Use [3, 4] to select the setting.
≥Items with “3” or “4” above and
below can be changed by [3, 4].
≥Some items require different opera-
tions. Read the explanations on the
following pages.
≥Press [ENTER] if the setting does not
change after using [3, 4].
∫ To clear the GUI screens
Press [RETURN] until they clear.
∫ To change the position of the GUI
screens
You can lower the position of the GUI
screens if they are cut off for some reason.
There are 5 positions to choose from.
1. Use [2, 1] to select the rightmost
icon.
2. Use [3, 4] to move the icons.
For your reference
≥Depending on the condition of the unit
(playing, stopped, etc.) and the type of
software you are playing, there are some
items that you cannot select or change.
≥When numbers are displayed (e.g.title
No.), the numbered buttons are also effec-
tive for setting. When numbers are entered
with the numbered buttons, press
[ENTER] to register the setting.
[-.
l
l
l
l
l
l
l
l
l
l
l
a---
Play menu
()
()
Video menu
Display menu Audio menu
3 Use [2, 1] to select the item.
e
u
e
u
To Next Page
Loading...
