Panasonic DVD-LA95 - Signal Data and Unit Information; Audio Signal Type and Data Explanation; Unit Information Menus (Video;Audio)

Advanced Operations
27
RQT6050
Screen for unit information
b Signal type/data
LPCM/PPCM/ÎDigital/DTS/MPEG: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits
ch (channel): Number of channels
Example: 3
/2 .1ch
.1: Subwoofer signal (not displayed if there is no subwoofer signal)
0: No surround
1: Mono surround
2: Stereo surround (left/right)
1: Center
2: Front leftiFront right
3: Front leftiFront rightiCenter
Icon Content
V.S.S. mode (➡ page 19)
≥SP-V.S.S. (Dolby Digital, DTS, MPEG, LPCM, 2-channel or over
≥only)
≥HP-V.S.S. (Dolby Digital, MPEG, LPCM, 2-channel or over only)
V.S.S. level (➡ page 19)
SP 1/HP 1()SP 2/HP 2()SP OFF/HP OFF
^---------------------------------------------------------J
(Dolby Digital, DTS, 3-channel or over only)
Dialogue Enhancer
ON()OFF
The volume of the dialogue from the center channel is raised when
you select “ON”.
DVD-V
VCDDVD-VRAM
Audio menu
SP OFF
OFF
SP
OFF
OFF
Video menu
N
Icon Content
Digital picture mode
N: Normal mode
C: Cinema mode (Mellow movies, enhances detail in dark scenes.)
VCDDVD-VDVD-ARAM
N