9.3.1. Caulking
Caulk the navigator buttons as described in the diagram below
when replacing the following parts.
1. Disc cover
2. Navigator buttons
3. Operating buttons
4. LCD window
5. Navigation switch
Note 1:
Be sure to remove the main unit´s cabinet before caulking.
Note 2:
Hold the navigator switch on a level surface so it does not
float while caulking.
9.3.2. Checking after caulking
Confirm that the left and right tabs have been opened.
Make sure that the navigator button does not come off by lightly
pressing down on the caulked part with a screwdriver, etc.
9.3. Caulking the navigator buttons
15
DVD-LV75 / DVD-PV55
To Next Page
Loading...
