17
RQT6526
Advanced operations
SLEEP
POWER
SLOW/SEARCH
SKIP
STOP PLAY
MENUTOP MENU
ENTER
DISPLAY
SUBTITLE
PROGRAM
RANDOM
REPEAT
A-B REPEAT
A SRD CINEMA
D ENH
AUDIO ONLY
CANCEL
AUDIO ANGLE
RETURN
SETUP
123
456
78
0
9
10
OPEN/CLOSE
PAUSE
RETURN
SETUP
CANCEL
3,4,2, 1
ENTER
QUICK REPLAY
Common procedures
Remote control only
See page 16 for menu and option details.
1 Press [SETUP] to show the menus.
≥The QUICK SETUP screen appears when you press [SETUP] the
first time after purchase (➡ page 8).
2 Press [2, 1] to select the menu’s tab.
The screen changes to display the menu.
Disc Video Audio
(---) (---)
e e
u u
Others Display
(------------------------------------------------------)
3 Press [3, 4] to select the item you want to
change and press [ENTER].
4 Press [3, 4] to select the option and press
[ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
To exit the SETUP menu
Press [SETUP].
Entering a password (Ratings)
[DVD-V]
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons and press
[ENTER].
≥If you enter a wrong number, press [CANCEL] to erase it before you
press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
2. Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD that exceeds the ratings limit you set,
a message appears on the television.
Follow the on-screen instructions.
Numbered
buttons
Digital output
[DVD-V]
Change the settings when you have connected equipment through this
unit’s DIGITAL AUDIO OUT terminal (OPTICAL).
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz. Select
“Yes” if the equipment you connect cannot process signals with a sampling
frequency of 96 kHz.
≥Select “No” if you use analog connection irrespective of the type of equipment.
No (Factory preset):
Output as 96 kHz. There is no output if the disc has copy protection. Select
“Yes” in this case.
Yes:
Converted to 48 kHz for output.
Dolby Digital and DTS Digital Surround
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM:
Select if the equipment you connected cannot decode the signal.
Off (Factory preset for DTS Digital Surround):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM or Off. If not, signals the equipment
cannot process will be output by this unit, causing high levels of
noise which can damage your hearing and the speakers.
Disc
SELECT
Audio
Subtitle
Menus
Ratings
English
English
Automatic
Level 8
SETUP
TAB
To Next Page
Loading...
