VQT4F00
3
Messages such as “No Adaptor” is displayed.
≥ Check if this unit is inserted fully and securely.
≥ Try removing this unit once, and inserting it again.
If it does not get recognized even after performing the above, consult the dealer where you
purchased this unit.
* This unit supports WPA and WPA2 encryption.
When this unit is not recognized
Specifications
Power supply DC 5 V (USB powered) 500 mA
Power consumption Max. 2500 mW
Dimensions (WkHkD) 30 mm (W)k74 mm (H)k12 mm (D)
Mass Approx. 18 g
Standard Compliance IEEE802.11b/ IEEE802.11g/ IEEE802.11n
Frequency Range 2.4 GHz band
Security* WPA
TM
/ WPA2
TM
(Encryption type : TKIP/AES,
Authentication type : PSK)
WEP (64 bit / 128 bit)
DY-WL5_E.book 3 ページ ２０１２年３月１２日 月曜日 午後５時４７分
To Next Page
Loading...
