Panasonic Easa-Phone KX-T2322A - Automatic Dialing Operations; Storing Phone Numbers; Dialing Stored Numbers; Hands-free Dialing (KX-T2342 A)

Automatic Dialing
■ There are 20 memory stations, each station is capable of storing 16 digits.
■ There are 6 Direct Cali buttons, each capable of storing 16 digits.
Each Dialing button serves as a memory station.
Storing Phone Numbers
Be sure the handset is on the cradle and
the SP-PHONE or Monitor button is off.
1 PROGRAM
Q|> £ J until the Memory
Push Indicator flashes.
2 To store a phone number.
B Home Use
BCeDGl) ■ + d>~®
Pu#h Station no. \ _ ,
(Use Dialing button) Phone nQ
■ * Q-
• Phone numbers can be stored into
memory stations 0 [H to [ 2 ] ED
following the same procedure.
/ or v
LI* “ ► E * * * E * f l-
Pti«h i-v • v > '
Pu,h Direct
Call
\ button
Phone no.
■ Office Use (PBX)
(e.g. ...line access number 9)
im -„ --- - P ALSE/SAV E
d E 0 - ► H ■ + □
push Station no. Line
(Use Dialing button) access
_ AUTQ
V
Phone no.
Or, you may use the Direct Call
button instead of pushing the station
number.
3 After storing all the numbers,
PROGRAM
&r~i .
Push -
•The Memory Indicator will go out.
Dialing
MONITOR
Lift the R3 ( o r t f CD
X Push
and indentify the dialing tone.
__ AUTO
2 s d - b s .
Station no.
(Use Dialing button)
Push Direct
Call
button
^ /
• When the other party answers if
you use the Monitor button, lift
the handset.
3 When you finish, hang up the
^ •
Hands-free (KX-T2342A only)
, mm SP-PHONE A UTO
1HD4Q40S.
Push -
Station no.
(Use Dialing button)
• You may use the Direct Call
button instead of pushing the
station number.
2 When you finish your
$P-PHONE
conversation, ( ) .
To change a stored number, repeat
the steps of “Storing Phone Numbers”,
- 5 -