77
Item code Item
Setting data
No. Description
Fan tap setting
(Fan tap change in order
to prevent drop in air
discharge caused by filter
installation)
Purpose
0000 Standard (Setting at shipment)
0001
High ceiling setting 1 (with standard, ECONAVI panel)
Air-flow blocking kit (when a duct is connected.)
Air-flow blocking kit (for 3-way air flow)
0003 High ceiling setting 2 (with standard, ECONAVI panel)
0006 Air-flow blocking kit (for 2-way air flow)
Timer function change
prohibit
0000 Function disabled
0001 Function enabled
Smudging control 0000 No smudging control
Fan tap setting
(External static pressure
of the rated air flow
volume)
0001
75Pa
(Setting at shipment)
0002 Type 200: 120Pa, Type 250: 130Pa
0003 Type 200: 180Pa, Type 250: 200Pa
Repeat timer switching
0000 Function disabled
0001 Function enabled
Type E3
Type U2
NOTE
Consider the device purpose and type when changing the settings. Incorrect settings may result in malfunction.•
• Do not change any setting data that does not appear in this list.
DescriptionItemItem code
DescriptionItemItem code
01
Filter sign ON time setting
(filter lifetime)
Changes the indoor unit filter lifetime when a high-performance filter or
other optional product is installed.
02
Degree of filter fouling
Reduces the filter sign ON time to 1/2 of the standard time (setting at the
time of shipping) for cases when filter fouling is more severe than normal.
Filter sign ON times for each model
Model
data
Model
Filter sign ON time
Standard Long-life
0006
0001
Ducted
High Static Pressure
4-Way Cassette (U2)
(E3)
× × × ×
× × 1250
NOTE
× indicates that there is no corresponding filter.•
7-5. Simple Setting Items
03 Central control address
Set when using a central control device.
Used when setting the central control address manually from the
remote controller.
Standard High fouling Standard High fouling
• High fouling: Set when
is selected for the degree of filter fouling (item code ).
04
Operating mode priority change Note (1)
NOTE
There are other methods to avoid control in which the mode selected first takes priority.
Methods of remotely controlling the operating mode
(1) Use the central functions of a central control device.
(2) Use a remote control relay PCB at the outdoor unit.
2500
7-11
SM830276-00_欧州向け R32シングル TD＆SM.indb 11 19/02/28 13:33:39
To Next Page
Loading...
