EP-MA10
ORDER NO. HPD1008U17CE
- 23 -
4.7. Removing the Sub PCB
1. Execute all the procedures of 4.1. Removing the Armrest.
2.Unscrew six screws (three for each left/right) and remove
foot cover (left/right).
3. Unscrew four screws (two for each left/right) and
remove Under box top. The Under box will be pulled
out after unscrewing two screws and remove the
Under box top left and Under box top right.
4. Removing connected hose.
5. Unscrew screws, cut the Cable tie, and disconnect
the Earth connector and the Connector.
To Next Page
Loading...
