Panasonic ER-GK20 - Troubleshooting Guide

20
English
Troubleshooting
Problem Action
The cutting
performance has
reduced.
Replace the blade.
(See page 19)
Replace the alkaline battery.
(See page 9)
Apply oil. (See page 18)
Clean the inner blade.
(See pages 15~17)
The appliance is not
turned on.
Place the alkaline battery
correctly. (See page 9)
Replace the alkaline battery.
(See page 9)
Conrm that the blade is
properly attached.
Makes a loud sound.
Apply oil. (See page 18)
Conrm that the blade is
properly attached.
If the problems still cannot be solved, contact the store
where you purchased the appliance or a service center
authorized by Panasonic for repair.
PB019077 - ER-GK20 ������_(01EN)_05-12-20.indd 20 2020/5/12 11:06:12