( RE9‑63 for
BF3 plug)
( RE9‑62 for C2 plug
and BF3 plug)
A Main body
1 T
rimming length indicator
2 P
ower switch
[0•CHARGE/1]
3 Charge indicator lamp
B Blade block
4 Moving blade
5 Stationary blade
6 Mounting hook
7 Cleaning lever
C Comb attachment for hair
D Comb attachment for
moustache
E
Comb attachment for body hair
F Comb attachment for
underarms/bikini area
G Charger
(RE9‑63 for BF3 plug, RE9‑62
for C2 plug and BF3 plug)
(Convenient induction
Charging Base)
8 Charger cover release
button
9 Charger cover
: Oil stand
; Cleaning brush stand
Charging section
H Comb attachment storage tray
Comb attachment insertion
slot
I Oil
J Cleaning brush
Attaching the comb attachment storage tray to the charger
Attach the comb attachment storage tray to the
side of the charger and slide it from the top, as
illustrated.
The charger can also be used without attaching
the comb attachment storage tray.
Note that the comb attachment storage tray may
fall off as it is not completely fixed.
•
•
Inserting the comb attachment into the comb attachment
storage tray
Insert the comb attachment into the comb
attachment insertion slot as illustrated.
Comb attachments can be inserted into any
insertion slot regardless of type.
There are 4 comb attachments. Place 3 of them
on the comb attachment storage tray and 1 on the
trimmer.
•
•
Storing and charging the trimmer
Place the trimmer on the charger when storing or charging it.
RE9‑63 for BF3 plug
You can fully charge the trimmer in 10 hours if it is losing speed.
A full charge supplies enough power for approximately 4 trims
(10 min
utes per trim for a normal beard).
RE9‑62 for C2 plug and BF3 plug
You can fully charge the trimmer in 8 hours if it is losing speed.
A full charge supplies enough power for approximately 5 trims
(10 minutes per trim for a normal beard).
The oil and the cleaning brush also can be placed on their stands.
To Next Page
Loading...